How to Install CCTV

Installing CCTV is a great way to keep an eye on your business or home. The right cameras can help you prevent thefts, burglaries and other crimes. But if you don’t know where to start or how to make sure your installation is secure, it can be a daunting task.

The first step is to choose a location for your cctv camera Singapore. Ideally, the cameras should be installed at least 10 feet high in order to avoid them being easily tampered with by thieves and vandals. It’s also a good idea to position the cameras so that they can see the entire area you want to monitor.

Secondly, you need to decide on the type of camera you’ll be using. Some cameras are fixed in place, while others can move around the room. Many cameras can be mounted in a variety of ways, including on walls, ceilings and on the tops of buildings. You can even find a few models that are wireless, meaning you can connect them to your phone or computer to monitor what’s going on.

After you’ve decided where to put your cameras, it’s time to hook them up to your system. Depending on the kind of camera you have, there may be specific instructions for doing so. If not, consult the camera’s manufacturer for guidance.


A security camera cable needs to be strong and well-protected from the elements. It must also be able to handle the constant movement of water, humidity and other factors that can cause damage over time. For this reason, it’s important to purchase a quality cable that’s been designed specifically for use in security cameras.

Once you’ve chosen a cable, it’s time to run it from the camera to your DVR or NVR. This may mean running it through the attic, down a basement, or in an attic-ceiling soffit, so you need to think about how to get this done.

For this, you need to create a central “surveillance hub.” This should be a place where you can safely run the Security System wires to each camera and where there is enough room for all of the cables. You can also install a router in this location so that each camera can be connected to a dedicated port on the router.

Now that the wires are run, you can attach each camera to the DVR or NVR by attaching a BNC cable to the output and the input on your camera’s BNC connection. For most cameras, this will be a simple process; just turn the small nut on the end of the cable and plug it into the appropriate ports on your DVR or NVR.

Then, you can begin to monitor your cameras from the DVR or NVR with the surveillance software that came with your camera. You may have to manually identify each camera, but you can usually view all of the video feeds at once on the software’s home screen.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *